BONDING TESTER PBT-17-01

Bonding Tester PBT-17-01

PRECISE MEASUREMENT TECHNOLOGIES make Bonding Tester is a portable, accurate, reliable, low resistance ohm meter designed to be used in precision laboratory applications and for applications in the eld / hangars. It is an equipment used to carry out metal bonding checks.
PRECISE MEASUREMENT TECHNOLOGIES make Bonding Tester can perform the following functions:

To measure the resistance of the bonding of metalwork on aircraft frames and large structures.

To check the bonding of electronic dischargers and fuel tanks.

To check earth bonds, cable bonds, lightning conductors etc.

To test bus bar continuity.

Technical Chart

Testing measurement Range * 2000 mΩ (milli ohm),
     resolution 1 m Ω (milli ohm). * 20 mΩ, resolution 0.01 mΩ.

Nominal test current: 2A to 2.5A nominal, with resistance up to 2 Ω

Accuracy: ± 1% ± 2 digits.

Display: 3 1/2 digit LED display

Operating temperature range: 0°C to 55°C ( 32°F to 131°F).

Humidity range: 95% RH at 40°C ± 2°C.

Power supply: >4 Ah capacity and total voltage rating of 7.2 V (minimum) rechargeable cells (NiCd /Lead acid) with internal charging unit with normal charging time of 12 hours (maximum) on 240V, 50Hz mains supply.

Safety Protection: * Suitable Relay protection for up to 240 V mains supply for current/voltage terminals.
* The instrument meets the requirements for IEC 610101-1.
* Over-range indication.
* Dangerous voltage warning/indication.
* In accordance with IEC61326-1.

Insulation: >1000 MΩ

Weight : 4.3 Kgs.

Dimensions : 260mm X 206mm X 156mm.