Rugged, dependable and high speed the Model 12C presents a very modest load to the integrated circuit. It can be used to troubleshoot high speed bipolar, NMOS and CMOS circuits-even some short holding time dynamic nodes. Each amplifier is individually optimized for peak performance and reliability. The Model 12C will withstand large input over voltages. The only known failure mode is the accidental breaking or crushing of the probe tip which can be easily replaced. A large selection of replaceable probe tips are available to accommodate a variety of probing needs.
Download GGB PicoProbe Model 12C Datasheet| Input Capacitance | 0.1pf |
| Input Resistance | 1.0 megohm |
| Rise/Fall Time | 0.8ns |
| Bandwidth | dc to 500 MHz |
| Linearity | 0.5% |
| Voltage Range | -10 to +20V* |
| Gain Accuracy | ±3% |
| Signal Attenuation | (High Input impedance oscilloscope: 10 to1) (50 ohm input: 20 to 1) |
| Calibration Substrate | Pad Size (microns) | Calibration Types Supported | Footprint | Pitch Range Recommended (microns) | Pitch Range Acceptable (microns) |
|---|---|---|---|---|---|
| CS-15 | 25 X 25 | SOLT, LRL, LRM | GSG | 40 – 150 (SOLT) 30 – 150 (LRL) |
40 – 150 |